Lamona LAM8740 User Manual

29
Exclusive to Howdens
Problem solving
Draining remaining water and
cleaning the pump filter
• Unplug the machine from the power supply.
• Pull the emergency draining hose out from its
stowed position.
• Place a towel on the floor.
• Place a suitable container under the hose. Drain the
water into the container by pulling out the blue plug.
• When finished, replace the blue plug into the hose.
• Replace the draining hose into its stowed position.
• Unplug the machine from the power supply.
• Place a towel on the floor.
• Unscrew the pump filter and remove.
• Remove any foreign objects from inside the filter as
well as fibres, if any, around the pump impeller.
• Replace the pump filter.
The filter system in your machine prevents solid items/
foreign objects clogging the pump during discharge.
The filter must be cleaned whenever it is clogged or
every 3 months.
Water must be drained off before cleaning the
pump filter.
If your machine will not drain/empty or
spin check the pump filter for debris.
WARNING: Foreign objects left in the pump
filter may damage your machine or may cause
noise issues.
WARNING: Temperature of the water inside the
machine may be up to 90ºC. Allow to cool before
draining the machine.
Draining the washing machine Removing foreign objects from the pump filter

Lamona LAM8740 Specifications

General

Brand	Lamona
Model	LAM8740
Category	Washer
Language	English