34
www.howdens.com
To ensure optimum performance it is recommended to run the drum calibration as described below.
(Your machine will functional normally without this additional calibration).
Your washing machine automatically detects the amount of laundry placed inside when selecting a program.
While installing the product, before the first use, calibration should be done to ensure that the laundry amount
is detected in the most accurate way.
To do this, select the Drum Cleaning* program and cancel the spin function. Start the program without laundry.
Wait for the program to finish, which will take about 15 minutes.
*The program name may vary depending on the model. For appropriate program selection, review the
program descriptions section.
Supplier name or trademark LAMONA LAMONA
Model name LAM8720 LAM8740
Rated capacity (kg) 7 8
Maximum spin speed (rpm) 1200 1400
Built-in Yes Yes
Height (cm) 82 82
Width (cm) 60 60
Depth (cm) 56 56
Single Water inlet Yes Yes
Double Water inlet No No
Electrical input (V/Hz) 230 V / 50Hz 230 V / 50Hz
Total current (A) 10 10
Total power (W) 2200 2200
Main model code 9211 9211
Technical specifications
SUPPLIER’S NAME MODEL IDENTIFIER
A
A
(*)
SUPPLIER’S NAME MODEL IDENTIFIER
A
A
(*)
Information
The model’s technical information can be retrieved by scanning the QR code on the Energy label and
proceeding to the website entering the model identifier.
To Next Page
Loading...
Need help?
General
