Lantronix EDS4100 Quick Start Guide

6
WWW.LANTRONIX.COM
Quick Start Guide
EDS4100
7
USING DEVICEINSTALLER GUI CONTINUED…
Note: If the unit already has an IP address (e.g.,DHCP has assigned an IP address),
click the Search icon and select the unit from the list of Lantronix device servers
on the local network.
2. Note the device IP address.
3. Access Web Manager by entering the device IP address in the address
bar of a browser. The device’s factory default username is “admin” and
factory default password is the last 8 characters
of the Device ID (for
devices manufactured after January 1, 2020) or “PASS” (for all older
devices).
Step 3: Complete the Configuration
Assign an IP address in the network settings and perform other
configuration.
To use Setup Mode (a command line interface), double-click the unit in
the list and click the Telnet Configuration tab or use a Telnet client.
Note: Please see the User Guide for detailed instructions on configuration.
CONFIGURATION USING WEB MANAGER
U
s
e
the menu to navigate to sub pages where you can configure the EDS.

Lantronix EDS4100 Specifications

General

Brand	Lantronix
Model	EDS4100
Category	Server
Language	English