Launch CNC-602A User Manual

LAUNCH Injector Cleaner & Tester User’s Manual
16
4. Main Components and Parts
Item Parts No. Parts Name Number Specifications Remarks
201020068
6-cylinder fuel distributor
package
1 set
1
201021493
8-cylinder fuel distributor
package
2 sets
For the Installation and
fixation of injector
103250002 6-cylinder fuel distributor 1
2
103250029
8-cylinder fuel distributor 2
Distributing the fuel from
the quick connector to
each injector
3 103250005 Crescent plate 3(4)
Tightening the fuel
distributor stopper
4 103250006 Press plate bolt 3(4)
Tightening the fuel
distributor assembly
5 103250014
Adaptor 2 for fuel
top-supply injector
6 (8)
For some top-supply
injectors
6 103250028
Stopper for fuel
distributor
6(8)
Installation of various of
top-supply injectors and
accessories
7 103230107
Adjusting pole 2 for
reverse flush
2
Length: 80mm
8 103250007 Knurled nut 2
I
nstallation between the
fuel distributor assembly
and upper press plate.
9 103250008 Pressing screw 2 2
Tightening the fuel
distributor assembly
10 103250013
Adaptor 1 for fuel
top-supply injector
6(8) Bore: Φ10.5
11 103250015
Swiss thread adaptor
for fuel top-supply
injector
6(8)
Be used for connecting
swiss thread injector
(M10×1).
12 103250016
Coarse thread adaptor
for fuel top-supply
injector
6(8)
Be used for connecting
coarse thread injector
( M12).
13 104990012 BUICK injector adaptor 6(8)
Be used for the connection
of BUICK injector.
14 103250018 Hexangular stopper 5(7)
Be used when the amount
of injectors is less than 6.

Launch CNC-602A Specifications

General

Brand	Launch
Model	CNC-602A
Category	Diagnostic Equipment
Language	English