LAUNCH Injector Cleaner & Tester User’s Manual
2
Special note: This user’s manual is an introduction to
the structure, functions, operations, cautions,
maintenance and troubleshooting for the proper use of
the equipment, LAUNCH Company retain the right of
changing product design and specifications, The actual
configuration according to the packing list.
Introduction
Thank you for purchasing the Injector Cleaner & Tester
manufactured by LAUNCH TECH CO., LTD. Developed
with the technology of ultrasonic cleaning and fuel
pressure control, this equipment is an advanced
electromechanical product, which can clean and test
injectors by simulating engine working conditions. It can
also perform cleaning on the injectors and fuel supply
system on vehicle.
Functions
z Ultrasonic cleaning: To perform simultaneous
cleaning on several injectors and to remove the
carbon deposits on the injector completely.
z Uniformity/Sprayability test: To test the uniformity
of injecting amount of each injector, and to monitor
the spraying status of each injector with the help of
backlight. This test is also for reverse flush.
z Leakage test: To test the sealing and dribbling
conditions of injectors under system pressure.
z Injecting flow test: To check the injecting amount
of the injector in 15 seconds of constant injection.
z Auto. test: To test injectors by simulating different
working conditions.
z On-vehicle cleaning: The unit is equipped with
various adaptors and couplers that facilitate
cleaning on the injectors on vehicle.
Features
z Adopting the powerful ultrasonic cleaning
technology, The equipment offers complete cleaning
to the injectors.
z Fuel pressure control through microcomputer offers
stable pressure control and large adjustable range,
which is suitable for all EGI vehicles and can help to
achieve automatic cleaning and testing of injectors.
z With the help of microcomputer control and digital
display, The equipment makes possible automatic
cleaning, testing injectors and real-time monitoring
of the dynamic values.
z Automatic fuel draining through preset programs for
some test items. Test liquid/detergent can also be
drained by pushing a button on the control panel
after the test.
z Adopting humanization design can make the
system pressure fast restored to the default values.
Specifications
Working conditions:
z Temperature: -10~+40℃;
z Relative humidity: ＜85%;
z Intensity of outer magnetic field:
＜400A/m;
z No naked flame within 2m.
Specifications:
z Main unit power supply:
□AC220V±10%, 50/60Hz;
□AC110V±10%, 50/60Hz.
z Main unit power:
230W（CNC-601A/ 602A）
280W（CNC-801A）
z Ultrasonic cleaner power: 100W;
z Simulated RPM
range: 10 ～ 9990rpm; step:
10rpm;
z Time range: 1～9999s;
z Pulse width: 0.5～25ms; step 0.1 ms;
z Fuel tank capacity: 4700ml（601A/801A）
4000ml（602A）
z Dimensions: 400mm×410mm×580mm（602A）
500mm×580mm×1400 mm（601A/801A）
z Weight: 27kg（CNC-602A）
95kg（CNC-601A/801A）
To Next Page
Loading...
Need help?
General
