32YOUR FIRST RIDE
Changing the Top Speed
The Lectric XP ships to all customers being capable of a maximum
of 20 miles per hour (mph). This means it is a class 2 electric bike in
states that recognize 3 classes of eBikes. In most states that only
recognize eBikes generally, the 20 mph top speed is legal for use
on public roads. A table detailing each class of electric bike can be
seen below.
You must check your local laws and regulations to determine if
it is lawful to ride class 3 eBikes on public roads before adjusting
the bike’s top speed. Laws vary by trail, path, and road so be sure to
check in each new location you will be riding.
States that recognize 3 classes of eBikes require a label to be placed
on the bike denoting the class the eBike falls into, the motors wattage
rating, and the top speed the bike will assist up to. Your bike comes
as a class 2 bike by default and has a sticker with this information
posted under the carry handle, near the seatpost on the bike. If you
change your bike’s top speed, you must remove this sticker from the
bike and replace it with a class 3 label detailing the eBike’s class, top
pedal assisted speed, and motor wattage. The class 3 label is located
directly under the class two sticker.
1
2 (Default)
3
20 mph
20 mph
28 mph
Throttle not
allowed
20 mph
20 mph
Class
Throttle
Top Speed
Pedal Assit
Top Speed
To change the top speed of the bike:
1. Access the settings menu by pressing and holding the plus and
minus buttons on the control pad simultaneously until the screen
says “P1”.
2. From here you can cycle through settings by hitting the power
button on the control pad and adjust the settings by pressing the
plus or minus buttons on the control pad.
3. Please go to setting “P08” and change this setting from 32 to 45.
To Next Page
Loading...
Need help?
General
