Lectric XP Step-Thru 2.0 User Manual

LECTRICEBIKES.COM | 602.715.0907 4
WARNING!
Read this entire manual before assembling or using your new electric
bike. Do not modify, disassemble, or replace the original electrical
components on your bike. Doing so will invalidate your warranty and
could put you in danger. Riding any type of bike comes with some
risks which can’t be predicted or avoided. Taking proper care of bike
components can lower the risk of sudden failure of components
but cannot prevent it. These sudden failures could cause serious
harm, injury, or death to the rider. If you notice abnormalities in any
component on the bike, take it to a licensed mechanic to be repaired
or replaced immediately. Lectric eBikes LLC assumes no liability for
harm, injury, or death of the rider.
This manual is not intended to function as a detailed service manual.
Lectric eBikes recommends having your local bike shop mechanic
perform a detailed safety check of your bike before your rst ride.
Ensure your local mechanic is experienced and reputable.
The Lectric XP can withstand most rain showers without sustaining
damage. The bike has an IP rating of 65. This means it is dust tight
and can withstand jetting water. See the IP code for more details.
It does not mean that the bike and its mechanical and electrical
components are waterproof. We do not recommend storing or using
the bike in excessively wet conditions. The warranty for the Lectric
XP does not cover water damage.
For technical assistance or warranty claims contact Lectric eBikes
at (602) 715-0907 or email at contact@lectricebikes.com.

Lectric XP Step-Thru 2.0 Specifications

General

Battery Capacity	460.8Wh
Weight	64 lbs
Category	Electric Bike
Battery	48V 9.6Ah
Range	45 miles (Throttle only: 20 miles)
Top Speed	28 mph
Frame	6061 Aluminum
Tires	20" x 3"
Brakes	Mechanical Disc Brakes
Gears	Shimano 7-Speed
Display	LCD
Lights	Integrated front and rear lights

Summary

WARNING!

MAINTAINING YOUR BIKE

100 Mile Tune Up

Service required after 100 miles or 5 charge cycles for initial wear-in.

MAINTAINING YOUR BIKE

Ongoing Service

Regular maintenance schedule for monthly and quarterly checks.

UNBOXING

GETTING STARTED

Unboxing and initial familiarization with the new eBike.

UNBOXING

FOLDING AND UNFOLDING THE BIKE

Instructions for folding and unfolding the handlebars and frame.

PREPARING TO RIDE

Suspension Fork Adjustment

Adjusting the suspension fork for terrain and rider weight.

PREPARING TO RIDE

Seat and Handlebar Stem Insertion

Ensuring seatpost and handlebar stem are past minimum insertion points.

PREPARING TO RIDE

Cable and Connector Checks

Checking front light, motor inhibitor switches, LCD, and throttle connections.

RECOMMENDED TORQUE VALUES

BATTERY

OPERATING YOUR BATTERY

Location and operation of the 48V lithium ion battery and its keys.

BATTERY

To turn on and lock the battery

Steps to insert, lock, and turn the battery ON for bike operation.

BATTERY

KEEPING YOUR BATTERY HEALTHY

Tips for maintaining battery health and longevity.

BATTERY

CHARGING YOUR BATTERY

Instructions and precautions for charging the eBike battery.

BATTERY SAFETY

OPERATING YOUR NEW EBIKE

COCKPIT TOUR

Identification of key controls and features on the eBike's cockpit.

OPERATING YOUR NEW EBIKE

Display Control Pad

Overview of the buttons on the display control pad.

YOUR FIRST RIDE

Tire and Seatpost Checks

Ensuring proper tire inflation and seatpost/handlebar insertion.

YOUR FIRST RIDE

Battery Installation and Power On

Securing the battery and turning on the eBike for the first time.

YOUR FIRST RIDE

Lights and Walk Mode Operation

Turning on lights and using the walk mode feature.

OPERATING SAFETY

7 SPEED GEAR SYSTEM

MECHANICAL DISC BRAKES

LCD DISPLAY FUNCTIONS

Display Indicators Explained

Explanation of the various indicators and readouts on the LCD display.

LCD DISPLAY FUNCTIONS

Operating the LCD Display

How to turn the bike on/off, adjust assist, and control lights.

LCD DISPLAY FUNCTIONS

Display Settings Menu

Details on adjusting brightness, units, sleep timer, tire size, and speed limit.

LCD DISPLAY FUNCTIONS

PAS Sensitivity and Strength

Adjusting PAS sensor sensitivity and motor strength.

Changing the Top Speed

Battery Capacity Display

Rough Range Estimates

TROUBLESHOOTING

Bike Won't Turn On Solutions

Steps to troubleshoot when the eBike fails to power on.

ERROR CODES

SAFETY

Helmets and Local Laws

Importance of helmets and adherence to local cycling laws.

SAFETY

Riding at Night and Max Weight

Safety precautions for riding at night and weight limit guidelines.

WARRANTY & DISCLAIMER

WARRANTY & DISCLAIMER

Warranty Service and Claims

Procedures for obtaining warranty service and processing claims.

Liability Disclaimer