• 41 •BALTIC-IOM-0412-E / Service manual
FRESH AIR HOOD
Installing
The fresh air hood has to be opened and secured during commissioning.
The 3 parts of the fresh air hood have to be assembled thanks to self taping screws delivered in the spare part box
Check the proper position of the black seal on the top of the hood cover.
Wind direction
The prevailing wind has to be taken into account while choosing the machine position on the building roof.
It’s highly recommended to avoid putting the fresh air hood in the prevailing wind direction to avoid water ingress risks.
If this is not possible please contact us to require specifi c water droplet strainer in the hood section.
WARNING: the fresh air hood cover can hurt your head if you don’t pay attention while turning around the unit.
To Next Page
Loading...
Need help?
General
