Page 10
Fan Schedule
The FAN setting can be programmed for ON, AUTO or CIRC for
each period selected:
ON Fan runs continuously. Use this setting for improved
air circulation or for more efficient central air cleaning.
AUTO Fan runs only when heating or cooling system is on.
CIRC Fan runs randomly approximately 35% of the time.
Use this setting for improved air circulation or for more efficient
central air cleaning when you do not want the fan to run continu-
ously.
Fan Status Display on Home ScreenIf the fan program is
scheduled, AUTO is displayed as the fan setting, along with the
particular fan setting that has been programmed. For example, if,
during the WAKE period, the Fan has been set to AUTO, then
AUTO is shown as the fan setting. However, if, during the WAKE
period, the Fan has been set to ON, both AUTO and ON are dis-
played. AUTO indicates that the fan has been scheduled and ON
indicates that the fan has been scheduled to be ON.
Manually Override Scheduled Fan SettingIf the fan setting
is scheduled, press the FAN key, then press the desired fan set-
ting to manually override the scheduled fan setting. Fan opera-
tion will return to the programmed operation when the next
schedule period begins.
SCHED HOLD CLOCK SCREEN
THU
AM
FAN
SYSTEM
HEAT
Following
Schedule
Inside
Set To
ON
AUTO
To Next Page
Loading...
Need help?
General
