Lennox DM User Manual

DC-DM-ROOFTOP-IOM-1801-E - 14 -
2.1.4
How to Modify the Value of the Current Setpoint Temperature ?
Press ‘Prg’ to activate the setup menu
If necessary, press several times ‘Up’ or ‘Down’ to blacken the icon
Press ‘Enter’ to confirm your choice
Press ‘Up’ or ‘Down’ to change the value
Press ‘Enter’ to confirm your choice
Press ‘Esc’ to return to the main screen
2.2 Functionality of the DM
2.2.1 Selection of Unit
A DM can be connected to 8 units on the pLan bus. Screens DM connected, alternatively, to one of BM.
The next screen allows selection of the unit to display:
Each of the 8 Unit is represented by a number.
The Unit selected is indicated by its number which is framed.
Each time you press the button 'Down Arrow' connects the display on the next Unit.
Button 'Enter': Go to main screen.
Button 'Down Arrow': Select the next Unit.

Lennox DM Specifications

General

Brand	Lennox
Model	DM
Category	Monitor
Language	English