Lennox iHarmony 17A30 User Manual

2
Tables of Contents
Shipping and Packing List ....................................2
Electrical Characteristics ......................................3
Dimensions ...........................................................3
Unit Dimensions (H x W x D) .............................................. 3
Wall Plate Dimensions (H x W) ........................................... 3
Installation Guide ..................................................3
Installation Considerations .................................................. 3
Unpacking Zone Sensor and Determining Best Location ... 4
Installing Zone Sensor ........................................................ 4
Zone Sensor Terminal Information ...................................... 6
Connecting Zone Sensor Wiring ......................................... 6
Install Zone Sensor to Backplate ........................................ 8
Setup Guide..........................................................8
Apply Power ........................................................................ 8
Menu > Advanced Settings ................................................. 8
Installer Checklist ...............................................12
Shipping and Packing List
Item Quantity
Zone sensor with backplate attached 1
Wall plate 1
Mounting screws (M3.5x25mm self-tapping screws) 2
Wall anchors 2
Warranty sheet 1
Installation and setup guide 1
User guide 1
WARNING
Improper installation, adjustment, alteration, ser-
vice or maintenance can cause property damage,
personal injury or loss of life.
Installation and service must be performed by a li-
censed professional HVAC installer (or equivalent)
or a service agency.
The 17A30 Zone Sensor can be used in systems
controlled by any Lennox communicating thermostat.
The 17A30 zone sensor can also be used in
combination with the 10C17 In-Zone thermostat.

Lennox iHarmony 17A30 Specifications

General

Brand	Lennox
Model	iHarmony 17A30
Category	Thermostat
Language	English