Lennox M0STAT60Q-1 User Manual

2
General
The M0STAT60Q-1 mini-split wireless
controller is a wireless local controller for
Lennox mini-split indoor units.
Requirements
Using the remote controller
• Point the remote controller directly at
the indoor unit.
• Stand within 26 feet (8 meters) of the
indoor unit.
• Do not block the signal between the
remote controller and indoor unit.
NOTE: The remote controller will not
function without a clear line of
sight to the indoor unit.
• Do not submerge the remote controller
in liquid.
• Do not expose to direct sunlight.
• Do not drop or step on remote
controller.
Using the remote control holder
• Use eld-provided fasteners to attach
the remote controller holder to any
suitable vertical surface such as a
wall within 26 feet (8 meters) of the
indoor unit.
• Ensure that the remote controller is
pointed directly at the indoor unit. If the
remote controller is pointed directly
toward the ceiling, it will not control
the indoor unit (except cassette units
if installed directly above the holder).
Specications
Table 1. Specications
Rated voltage
3.0 VDC
(2 AAA batteries)
Min voltage for
sending signal to
CPU
2.4 VDC
Effective
transmitting
distance
26 feet (8
meters)
Operation
conditions
23°F to 140°F
(-5 to 60°C)
Function Buttons
• Up arrow button. Press to increase
the temperature setpoint or to scroll
through settings options.
• On/Off button. Press to turn the
indoor unit on or off.

Lennox M0STAT60Q-1 Specifications

General

Brand	Lennox
Model	M0STAT60Q-1
Category	Remote Control
Language	English