8
3. Adjust temperature setpoint using
up and down arrow buttons (range
62°F – 86°F).
NOTE: Fan speed is auto and is not
adjustable.
Cool/Heat/Fan mode
1. Press the Mode button to select
Cool, Heat, or Fan.
2. Adjust the temperature setpoint
using up and down arrow buttons
(range 62°F – 86°F).
3. Press the Fan Speed button to
select Auto, Low, Med, or High fan
speed.
NOTE: Temperature set point is not
displayed in Fan mode.
Dry Mode
1. Press the Power button. An LED
light on the indoor unit displays.
2. Press the Mode button to select
Dry.
3. Adjust the temperature setpoint
using up and down arrow buttons.
NOTE: Fan speed is not adjustable.
Timer Operation
Timer ON and Timer OFF are used to
turn on and turn off the indoor unit at
selected intervals.
Timer ON Operation
1. Press the Timer ON button. The
Timer ON icon, the last auto-on
time, and “h” will display.
2. Press the Timer ON button again to
set the amount of time before the
indoor unit begins operation. Each
press will increase the time in half
hour increments until 10 hours, then
the increment becomes 1 hour.
Timer OFF Operation
1. Press the Timer OFF button. The
Timer OFF icon, the last auto-off
time, and “h” will display.
2. Press the Timer OFF button again
to set the amount of time before the
indoor unit stops operation. Each
press will increase the time in half
hour increments until 10 hours, then
the increment becomes 1 hour.
Modify Timer ON/OFF settings
1. Press either the Timer ON button or
the Timer OFF button to modify that
setting.
2. Use the up arrow and down arrow
buttons to change the timed
operation intervals.
3. Set the timer to 0.0 to turn off timed
operation.
To Next Page
Need help?
General
