• 4 • Installation - Operation - Maintenance manual (IOM) • AIR COOLED CHILLERS & SPLIT UNITS - 0105-E
PREFACE
1 - PREFACE
You must read and be familiar with this operating manual prior to commission the chiller.
Please closely follow the instructions.
We would like to stress the importance of training with respect to the correct handling of the chiller. Please
consult Lennox on the options available in this field.
It is important that this manual be stored in a permanent location in the vicinity of the chiller.
Text Important general instruction
Danger of Injury or damage to the chiller
This manual contains important instructions regarding the commissioning of the chiller. It also includes important
instructions to prevent personal injury and damage to the machine during operation. Furthermore, in order to
promote fault-free operation of the chiller, maintenance information has been included.
Please do not hesitate to contact one of our employees should you require further information on specific chiller
subjects.
Order related documentation will be forwarded under separate cover.
This documentation consists of :
- CE declaration.
- Operating manual for control system.
- Installation Operating manual
- Wiring diagram.
- Refrigerant flow diagram (except for WA-RA-WAH-LCH)
- Unit detail are given on unit nameplate.
The data published in this manual is based on the most recent information available. It is supplied conditional to
later modifications. We reserve the right to modify the construction and/or design of our chillers, at any time, without
prior notification or obligation to adapt previous supplies accordingly.
Any work on the Chiller should be carried out by trained and licenced competent technician.
The following risks are present on the unit :
- risk of electrical shock
- risk of injury from rotating parts
- risk of injury from sharp edges and heavy weight
- risk of injury from high pressure gas
- risk of injury from high and low temperatures components.
It is expected that all works on equipment be carried out in accordance with all local standards and norms.
It is expected that all worls are carried out with good working practices.
To Next Page
Loading...
Need help?
General
