Lenovo IDEAPAD S100 User Manual

7
Chapter 2. Learning the basics
First use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Reading the manuals
Read the supplied manuals before using your computer.
 Connecting to the power
The supplied battery pack is not fully charged at purchase.
To charge the battery and begin using your computer, insert the battery pack
and connect the computer to an electrical outlet. The battery is automatically
charged while the computer is running on AC power.
Installing the battery pack
Refer to the supplied Setup Poster to install the battery pack.
Connecting the computer to an electrical outlet
1 Connect the power cord to the AC adapter.
2 Connect the AC adapter to the AC power adapter jack of the computer
firmly.
3 Plug the power cord into an electrical outlet.
 Turning on the computer
Press the power button to turn on the computer.
 Configuring the operating system
You may need to configure the operating system when it is first used. The
configuration process may include the procedures below.
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account

Lenovo IDEAPAD S100 Specifications

General

HDD speed	5400 RPM
HDD capacity	320 GB
HDD interface	SATA
Processor cache	0.512 MB
Processor front side bus	667 MHz
Display diagonal	10.1 \
Display resolution	1024 x 600 pixels
Infrared data port	No
Ethernet LAN	Yes

Weight and Dimensions

Depth	168 mm
Width	268 mm
Height	16.27 mm
Weight	1100 g