EasyManuals Logo

Lenovo Yoga Pro 7 14ARP8 User Manual

Lenovo Yoga Pro 7 14ARP8
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Select boot devices
Normally, the computer starts to a boot manager loaded from the secondary storage device of the computer.
Occasionally, you may need to start the computer to a program or boot manager loaded from another device
or a network location. After the system firmware initializes all devices, you can press an interruption key to
display the boot menu and select a desired boot device.
Step 1. Turn on or restart the computer.
Step 2. Press F12.
Step 3. From the boot device menu, select a boot device to start the computer.
You can make a permanent change on boot devices in the UEFI/BIOS setup utility. Select the Boot menu; in
the EFI section, select the desired boot device and move it to the top of the device list. Save changes and
exit the setup utility for the change to take effect.
Change hotkey mode
Step 1. Open the UEFI/BIOS setup utility.
Step 2. Select Configuration Hotkey Mode and press Enter.
Step 3. Change the setting to Disabled or Enabled.
Step 4. Select Exit Exit Saving Changes.
Enable or disable always-on
For some Lenovo computers with always-on connectors, the always-on function can be enabled or disabled
in the UEFI/BIOS setup utility.
Step 1. Open the UEFI/BIOS setup utility.
Step 2. Select Configuration Always On USB and press Enter.
Step 3. Change the setting to Disabled or Enabled.
Step 4. Select Exit Exit Saving Changes.
Enable or disable Flip to Start
When Flip to Start is enabled, you can turn on the computer by flipping open the screen.
Step 1. Open the UEFI/BIOS setup utility.
Step 2. Select Configuration.
Step 3. Change the setting for Flip to Start.
Note: You may also set Flip to Start in Lenovo Vantage or Lenovo Smart Engine.
Set passwords in UEFI/BIOS setup utility
This section introduces the types of passwords that you can set in the UEFI (Unified Extensible Firmware
Interface) or BIOS (Basic Input/Output System) setup utility.
Password types
You can set various types of passwords in the UEFI/BIOS setup utility.
22
User Guide

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lenovo Yoga Pro 7 14ARP8 and is the answer not in the manual?

Lenovo Yoga Pro 7 14ARP8 Specifications

General IconGeneral
Operating SystemWindows 11 Home
WirelessWi-Fi 6E, Bluetooth 5.1
RAM16 GB LPDDR5
Storage512 GB SSD
GraphicsAMD Radeon 680M
Battery73Wh
PortsHDMI 2.1

Related product manuals