EasyManuals Logo
Home>Lenze>Control Unit>2102

Lenze 2102 User Manual

Lenze 2102
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Installation
4-2
L
_^ONMObk
Pos. Name/Meaning Note
1 Green bus LED (voltage supply)
ON: Fieldbus module has connected with the controller.
BLINKING: 2102 fieldbus module is supplied with voltage but is
not connected to the controller (controller is switched off, in
initialization or not available).
2 Yellow RxD-LED For receiving signal:
BLINKING: Drive unit receives telegram
3 Yellow TxD-LED For sending signal:
BLINKING: Drive unit transmits response
4 9-pole SubD fema le plug for the RS232/RS485 interface only with 2102IB.V901/2102.V904
5 Fixing screw
6 4-pole clamp-plug connection for RS485 interface only with 2102IB.V901/2102.V904 and
2102IB.V902/2102.V905
7 Operating status display f or the controller
8 Optical-fibre transmitter (white) only with 2102IB.V903/2102.V906
9 Optical-fibre receiver (black) only with 2102IB.V903/2102.V906
10 S witch S1 for optical-fibre t ransmission rate:
OFF: normal transmission rate (0 to 40m)
ON: = high transmission rate (10 to 66m)
only with 2102IB.V903/2102.V906
11 Connection for external voltage supply (24 V DC ± 10 %)
12 PE connection (only for 82XX)
Fig. 4-2 - RS 485 cable (no drawing) o nly with 2102IB.V901/2102.V904 and
2102IB.V902/2102.V905
4.1.2 Female plug for 9-pole SubD plug (LECOM-A/B)
Pin Name Input/output Explanation
1 - - Not assigned
2 RxD Input Data receiving wire RS232
3 TxD Output Data transmitting wire RS232
4 DTR Output Transmission control RS232
5 GND - Reference potential
6 DSR Input Not assigned RS232
7 T/R(A) Input/output RS485
8 T/R(B) Input/output RS485
9 Vcc5 Output Supply +5 V / 10 mA
4.1.3 Plug-in terminal for 4-pole male plug (LECOM-B)
Pin Name Input/output Explanation
71 T/R(B) Input/output RS485
72 T/R(A) Input/output RS485
88 S-C - Capacitive screening to PE
89 S - Direct screening to PE
4.1.4 Plug-in terminal for 2-pole male plug (external voltage supply)
Pin Name Input/output Explanation
39/ GND24 - Reference potential for external supply
59/+ Vcc24 Input External supply 15 to 30 V DC (see chapter 4.3)
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Show/Hide Bookmarks

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lenze 2102 and is the answer not in the manual?

Lenze 2102 Specifications

General IconGeneral
BrandLenze
Model2102
CategoryControl Unit
LanguageEnglish

Related product manuals