Lenze 530 series User Manual

20
L
4.3 Connecting voltage
As a standard, the controller is factory-set for the operation on a mains voltage
from 190 to 265 V ±0 %. For a mains voltage from 100 to 132 V ±0 % replace
jumper "BR1" with "BR2".
Caution!
This modification must only be carried out by qualified skilled personnel
when no voltage is applied. After replacing the jumpers the protective
cover must be reassembled.
L
N
T1-B
T1-C
T1-A
BR1BR2
1
3
5
7
9
10
6
230V / 120V
0,9VA
EI 30

Lenze 530 series Specifications

General

Brand	Lenze
Model	530 series
Category	Controller
Language	English