To Next Page

To Previous Page

Contents

UOMu_^MVMO i

1 Preface and general information 1-1...........................

1.1 About these Operating Instructions ... 1-1.......................

1.1.1 Terminology used 1-1...............................

1.1.2 What is new? 1-2..................................

1.2 Scope of delivery 1-2.....................................

1.3 Legal regulations 1-3.....................................

2 Safety information 2-1......................................

2.1 General safety information 2-1...............................

2.2 Layout of the safety information 2-3...........................

2.3 Residual hazards 2-4.....................................

3 Technical data 3-1.........................................

3.1 General data/application conditions 3-1.........................

3.2 Rated data (Operation with 150 % overload) 3-2...................

3.2.1 Types 8201 to 8204 3-2.............................

3.3 Fuses and cable cross-sections 3-4...........................

3.3.1 Single drives with 150 % overload 3-4....................

3.4 Dimensions 3-4.........................................

4 Installation 4-1............................................

4.1 Mechanical installation 4-1.................................

4.1.1 Important notes 4-1.................................

4.1.2 Standard assembly with fixing rails or fixing angles 4-3.........

4.1.2.1 Types 8201 to 8204 4-3......................

4.1.2.2 Type 8202-V002 (reduced assembly depth) 4-4.......

4.1.3 DIN-rail assembly 4-5...............................

4.2 Electrical installation 4-6...................................

4.2.1 Important notes 4-6.................................

4.2.2 Power connections 4-7..............................

4.2.2.1 Mains connection 4-7........................

4.2.2.2 Motor connection 4-7........................

4.2.2.3 Connection diagram 4-9.......................

4.2.3 Control connections 4-10..............................

4.2.3.1 Control cables 4-10...........................

4.2.3.2 Assignment of the control terminals 4-10............

4.2.3.3 Connection diagrams 4-12......................

4.3 Installation of a CE-typical drive system 4-13......................

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Lenze 8201 User Manual

Questions and Answers: