Name: Lenze EVF8201-E
Brand: Lenze
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Installation

4-4 820XBA1097

4.1.2.2 Type 8202-V002 (reduced assembly depth)

This variant is equipped with a heat sink with a smaller surface.

Observe the following points to comply with the technical data:

Assembly on an unpainted, metallic assembly board.

Area > 0.15 m

Sheet thickness at least 2 mm.

All manuals and user guides at all-guides.com

Table of Contents3
Preface and General Information5
About These Operating Instructions5
Terminology Used5
What Is New6
Scope of Delivery6
Legal Regulations7
Safety Information9
General Safety Information9
Layout of the Safety Information11
Residual Hazards12
Technical Data13
General Data/Application Conditions13
Rated Data (Operation with 150 % Overload)14
Types 8201 to 820414
Fuses and Cable Cross-Sections16
Single Drives with 150 % Overload16
Dimensions16
Installation17
Mechanical Installation17
Important Notes17
Standard Assembly with Fixing Rails or Fixing Angles19
Types 8201 to 820419
Type 8202-V002 (Reduced Assembly Depth)20
DIN-Rail Assembly21
Electrical Installation22
Important Notes22
Power Connections23
Mains Connection23
Motor Connection23
Connection Diagram25
Control Connections26
Control Cables26
Assignment of the Control Terminals26
Connection Diagrams28
Installation of a CE-Typical Drive System29
Commissioning33
Before You Switch on33
Short Set-Up (Factory Setting)34
Switch-On Sequence34
Factory Setting of the most Important Drive Parameters35
Adapt Machine Data36
Determine Speed Range (Fdmin, Fdmax)36
Adjustment of Acceleration and Deceleration Times (Tir , T If)38
Setting of the Current Limit (Imax)39
Optimisation of the Operating Characteristic of the Drive40
Select the Control Mode40
Optimisation of V/F-Characteristic Control with Auto Boost43
Optimisation of V/F-Characteristic Control45
During Operation47
Configuration49
Basics49
Code Table50
Troubleshooting and Fault Elimination59
Troubleshooting59
Display at the Controller59
Display at the Operating Module59
Maloperation of the Drive60
Fault Analysis Using the History Buffer60
Fault Indications61
Reset of Fault Indications63
Accessories (Overview)65
Accessories for All Types65
Software66
Type-Specific Accessories66
Index67

Brand	Lenze
Model	EVF8201-E
Category	DC Drives
Language	English

Lenze EVF8201-E User Manual

Table of Contents

Questions and Answers:

Lenze EVF8201-E Specifications

Related product manuals