Lenze g500-S660 User Manual

Venlaon
No venlaon is required for the gearboxes g500-S130 … S220.
The gearbox g500-S220 can oponally be ed with a venlaon unit.
From g500-S400 onwards, the gearboxes are supplied with venlaon units as
standard.
To reduce the number of dierent versions, the following gearboxes can also be ordered with
combined mounng posions:
•
g500-S130 ... S660 in mounng posion M1/5/6 (AEF)
In these gearboxes, the lubricant amount has been opmised for the use in
dierent mounng posions. If required, the breather elements are loosely
enclosed and must be mounted before commissioning depending on the
mounng posion.
4The modular system ^ 10
NOTICE
▶
For gearboxes with venlaon, a gap of at least 30 mm has to be observed to the machine
wall on the corresponding gearbox side.
Informaon on project planning
Final conguraon
Venlaon
33

Lenze g500-S660 Specifications

General

Brand	Lenze
Model	g500-S660
Category	Industrial Equipment
Language	English