Lenze GSS Series User Manual

About this documentation
Document history
1
6
Lenze • BA 12.0023 • 9.0
1.1 Document history
Material number Version Description
00 390 375 1.0 11/1995 TD09 First edition for pilot s eries
00 393 076 1.0 03/1997 TD09 Complete editorial revision
00 393 076 1.0 04/2000 TD09 Supplement for chapter 5.3.1 ”Preparatory work”
Update of the illustrations for chapter 5.3.10 ”Gearbox with ventilation”
00 407 986 1.0 12/2000 TD09 Complete editorial revision
Revision of the product key and position of the system blocks
Supplemented by gearbox size 03
Chapter 5.3.12 ”Gearbox with compensation container” in mounting position C
Chapter Spare parts list for compensation reservoirs”
Change of lubricant amounts
00 425 604 1.0 08/2001 TD09 Chapter 5.3.8 ”Mounting of shrink disc covers”: new
Chapter 5.3.9”Mounting of hollow shaft covers hoseproof”: new
Supplemented by GKR 05
00 425 604 2.0 11/2001 TD09 Changes to lubricant amounts
00 460 708 1.0 12/2002 TD09 Changes with regard to nameplates
Supplemented by GKR 06
Change of name
00 460 708 2.0 02/2003 TD09 Supplement - warning in chapter 5
00 476 711 2.1 10/2003 TD09 Changes: product key and position of the system blocks
Supplemented by chapter 8.2.2, ”Roller bearing grease” and chapter 8.2.3, ” Lubricant
table”
13124908 3.0 11/2005 TD09 New nameplate ”Geared motor” included.
Revision of the lubricant table
13166718 4.0 08/2006 TD09 Revision of the nameplate designation
New nameplate: CSA/UL type
Supplemented by chapter ”Mounting of the shrink disc with a rotating cover”
Revision of the chapter ”Position of the ventilation unit, oil filler plug and oil drain
plug”
Supplemented by drive sizes: 3F; 4E; 6C, and 7C
13290892 5.0 03/2009 TD09 Complete revision
13321528 6.0 11/2009 TD09 Conversion from G-motion to L-force Geared Motors
Chapter ”Condensation drain hole” supplemented
13404748 7.0 11/2011 TD09 Update of the lubricant table
Change of lubricant amounts for GST
Transport weights supplemented
Table of roller bearing greases supplemented
13477846 8.0 12/2014 TD09 Supplement to nameplate - geared motor standard type
Note ”Geared motors for deep-freeze application” inserted in ”Safety instructions”
chapter
Values in Tab. 3 added
Values in table of chapter 8.2.6 added for GST
.S>, 9.0 11/2015 TD09 Operating condition: ”Mechanical” deleted
Supplement: encoder code,  22
”Auxiliary tool” table updated

Lenze GSS Series Specifications

General

Brand	Lenze
Model	GSS Series
Category	Engine
Language	English