Operating instructions i550 motec frequency inverter | 24
© 03/2022 · EN · www.Lenze.com
The most important parameters at a glance
This chapter contains the most important parameters and selections.
You can nd a detailed description in the commissioning document:
www.lenze.com/product-information
Parameter list
In the "EASY Starter" you have access to all available parameters of the inverter via the
"Parameter list" tab.
The parameters are divided into the following function groups in the parameter list:
• Group 0 - favorites
• Group 1 - diagnostics
• Group 2 - basic setting
• Group 3 - motor control
• Group 4 - I/O setting
• Group 5 - network setting
• Group 6 - process controller
• Group 7 - additional functions
• Group 8 - sequencer
Group 0 - favorites
Group 0 contains the congurable favorites that are also contained in the groups 1 to 4. In the
default setting these are the most common parameters for the solution of typical applications.
Commissioning
Important notesInitial switch-on
Parameter overviewQuick commissioning
EASY Starter
Additional functions
Basic setting Motor control
Favorites
To Next Page
Loading...
Need help?
General