7
Display Lock Button &
Indicator
• Prevents current settings
from being changed (see
page 12). Press and hold
for 3 seconds to lock and
unlock the display.
Display O Button
• Turns the display o (see
page 11).
• Tap any button to turn the
display back on.
CONTROLS & DISPLAY (CONT.)
Light Sensor
• The Light Sensor detects
the amount of light in the
room to automatically adjust
the air purifier settings (see
Light Detection, page 11).
• Light Detection can be
turned on/o in the VeSync
app (see page 11).
Note: Display Lock can also
be controlled through the
VeSync app.
GETTING STARTED
1. Place the air purifier on a flat, stable
surface such as the floor.
2. Pull both sides of the front cover to
remove it. [Figure 1.1]
Figure 1.1
3. Push the pre-filter’s tabs inward and
pull to remove the pre-filter from the air
purifier. [Figure 1.2]
• The Display Lock Indicator
will light up when the
display is locked and blink
when any other button
is tapped to indicate the
display is locked.
Figure 1.2
To Next Page
Loading...
Need help?
General
