10
OPERATION
NOTE:
• Remember to position the humidifier at least 10
inches away from walls, and direct the nozzle so
that the produced mist is at least 40 inches away
from walls.
• The nozzle can rotate 360° to diuse mist in any
direction. [Figure 2.2]
• If you encounter any issues while operating
the humidifier, please see the Troubleshooting
section on page 18. If you encounter any issues
that are not mentioned in the Troubleshooting
section, contact Customer Support with the
information provided on page 21.
General Operation
1. Place the humidifier on a flat, elevated
surface. (Tables and nightstands work best!)
2. Plug the unit into an electrical outlet.
3. Tap the power button once to turn on the
humidifier; it will start operating on low mist as
the default setting. Once the humidifier is on,
you can also change the mist level by tapping
the power button again (See chart on page 11).
4. When the water level is low the power button
will light up red, and the humidifier will stop
producing mist.
5. Unplug the humidifier and refill the water tank
as mentioned in the Getting Started section
(page 8).
Figure 2.1
Figure 2.2
To Next Page
Loading...
Need help?
General
