16
KEEPING THINGS CLEAN
General Cleaning
CAUTION: Make sure the humidifier is completely unplugged from any power
source when cleaning.
1. Unplug the humidifier.
2. Remove the top cover from the water
tank. Rinse the nozzle under clean
running water, then set it aside to air dry.
DO NOT attempt to remove the nozzle
from the cover.
3. Remove the water tank from the base
and pour out any excess water. Fill
the tank with 2 cups of distilled white
vinegar and 2 cups of water; replace the
cap and gently shake to coat all sides of
the water tank.
4. Fill the inner chamber with 1 cup of
distilled vinegar. [Figure 5.1]
5. Allow the vinegar to soak inside both
the water tank and inner chamber for 30
minutes.
6. Use the included cleaning brush to
remove any scale buildup inside the
inner chamber. [Figure 5.2]
7. Pour out the vinegar from both parts of
the humidifier and thoroughly rinse with
warm water.
8. Dry all parts with a dry, clean cloth.
Make sure all parts of the humidifier are
completely dry before reassembling and
storing in a covered space.
NOTE: The water in the inner chamber near the transducer may still be warm after turning o the unit. Use
caution when pouring out the water.
Figure 5.1 Figure 5.2
Inner chamber
To Next Page
Loading...
Need help?
General
