4 Install the dust cover.
Note: When the printer software and any options are installed, it may be necessary to manually add the
options in the printer driver to make them available for print jobs. For more information, see
“Adding
available options in the print driver” on page 19.
Attaching cables
Connect the printer to the computer using a USB cable or to the network using an Ethernet cable.
Make sure to match the following:
• The USB symbol on the cable with the USB symbol on the printer
• The appropriate Ethernet cable to the Ethernet port
Warning—Potential Damage: Do not touch the USB cable, any wireless network adapter, or the printer in the
area shown while actively printing. A loss of data or a malfunction can occur.
1
2
4
3
Additional printer setup 18
To Next Page
Loading...
Need help?
General
