Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of the
printer.
2
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3
Close door A.
Paper jam in trays
1
Remove the tray.
Warning—Potential Damage: A sensor inside the optional
tray is easily damaged by static electricity. Touch a metal
surface before removing the jammed paper in the tray.
2
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3
Insert the tray.
Paper jam in the manual feeder
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
Paper jam in the multipurpose feeder
Note: The multipurpose feeder is available only if the optional
650-sheet duo tray is installed.
1
Remove paper from the multipurpose feeder, and then close
it.
10
To Next Page
Loading...
Need help?
General
