1
Open the multipurpose feeder.
2
Adjust the guide to match the size of the paper that you are
loading.
3
Flex, fan, and align the paper edges before loading.
4
Load the paper.
•
For one-sided printing, load letterhead with the printable
side facedown and the top edge entering the printer first.
•
For two-sided printing, load letterhead with the printable
side faceup and the top edge entering the printer last.
•
Load envelopes with the flap side up and against the right
side of the paper guide.
Warning—Potential Damage: Do not use envelopes with
stamps, clasps, snaps, windows, coated linings, or
self
‑
stick adhesives.
5
From the Paper menu in the control panel, set the paper size
and type to match the paper loaded in the multipurpose feeder.
Setting the paper size and type
1
From the home screen, touch Settings > Paper > Tray
Configuration > Paper Size/Type > select a paper source.
2
Set the paper size and type.
5
To Next Page
Loading...
Need help?
General
