EasyManuals Logo
Home>Lexmark>Printer>CX317dn

Lexmark CX317dn User Manual

Lexmark CX317dn
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Turn o the printer, and then unplug the power cord from the electrical outlet.
Disconnect all cords and cables from the printer.
If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in flooring.
If the printer does not have a caster base but is configured with optional trays, then lift the printer o the
trays. Do not try to lift the printer and the trays at the same time.
Always use the handholds on the printer to lift it.
Any cart used to move the printer must have a surface able to support the full footprint of the printer.
Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.
Keep the printer in an upright position.
Avoid severe jarring movements.
Make sure that your
fingers
are not under the printer when you set it down.
Make sure that there is adequate clearance around the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, use only the power cord
provided with this product or the manufacturer's authorized replacement.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer
o,
and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone
system connections) are properly installed in their marked plug-in ports.
This product is designed, tested, and approved to meet strict global safety standards with the use of
specific
manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer
is not responsible for the use of other replacement parts.
CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power
cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects
such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect
the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet
before inspecting it.
Refer service or repairs, other than those described in the user documentation, to a service representative.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the
printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.
CAUTION—TIPPING HAZARD: Floor-mounted
configurations
require additional furniture for stability.
You must use either a printer stand or printer base if you are using multiple input options. If you
purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional
furniture. For more information, see
www.lexmark.com/multifunctionprinters.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
SAVE THESE INSTRUCTIONS.
Safety information 7

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark CX317dn and is the answer not in the manual?

Lexmark CX317dn Specifications

General IconGeneral
CertificationENERGY STAR, Blue Angel RAL-UZ-171, ICES-003 Class B, BSMI Class B, VCCI Class B, US FDA, UL 60950-1, FCC Class B, cUL CAN/CSA-C22.2 60950-1, CB EN/IEC 60950-1, CB EN/IEC 60825-1, CE DoC (EN 62301 Class B, EN 62311, CE EN/IEC 60950-1, CE EN/IEC 60825-1, EN 61000-3, EN 55022 Class B, EN 55024, UL), EFTA (CE), KCC, CCC, CECP, CEL, C-tick DoC, UL-AR, KC mark, UL GS mark, EC 1275, MET-I, ISO 532B, ECMA-370, GOST-R, SII, TER
Sustainability certificatesBlue Angel, ENERGY STAR
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)11.5 s
Time to first page (color, normal)12.5 s
Print speed (black, normal quality, A4/US Letter)23 ppm
Duplex print speed (black, normal quality, A4/US Letter)12 ppm
Copier resize25 - 400 %
Maximum copy resolution- DPI
Copy speed (black, normal quality, A4)23 cpm
Scan toE-mail, FTP, USB
Scanner typeFlatbed & ADF scanner
Maximum scan area216 x 356 mm
Scan speed (color)30 ppm
Image formats supportedJPG, TIF
Document formats supportedPDF, XPS
Optical scanning resolution (black)1200 x 600 ppi
Optical scanning resolution (color)600 x 600 ppi
FaxingNo
Digital sender-
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle60000 pages per month
Recommended duty cycle500 - 5000 pages per month
Page description languagesMicrosoft XPS, PCL 5c, PCL 6, PDF 1.7, PPDS, PostScript 3
Paper tray media typesCard stock, Labels, Plain paper, Transparencies
Paper tray media weight60 - 176 g/m²
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size), Universal
ISO A-series sizes (A0...A9)A4, A5
JIS B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Cabling technology10/100/1000Base-T(X)
Security algorithmsSNMPv3
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocols (IPv4)TCP/IP IPv4, AppleTalk
Supported network protocols (IPv6)TCP/IP IPv6, TCP, UDP
Internal memory512 MB
Processor cores2
Processor frequency800 MHz
Maximum internal memory2560 MB
Sound power level (standby)16 dB
Sound pressure level (copying)48 dB
Sound pressure level (printing)7 dB
Sound pressure level (scanning)49 dB
Sound pressure level (duplex printing)50 dB
DisplayLCD
Product colorGray
Display diagonal2.4 \
Market positioningBusiness
USB connectorUSB Type-B
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
USB 2.0 ports quantity1
Power consumption (max)540 W
Power consumption (off)0.5 W
Power consumption (ready)30 W
Power consumption (sleep)2.5 W
Power consumption (scanning)40 W
Power consumption (average operating)500 W
Other operating systems supportedHP-UX 11.11, HP-UX 11.23, HP-UX 11.31, IBM AIX 5.3, IBM AIX 6.1, IBM AIX 7.1, Novell Distributed Print Services (NDPS), Novell NetWare 5.x, Novell NetWare 6.x, Novell Open Enterprise Server, Solaris 10, Solaris 10 SPARC, Solaris 11, Solaris 11 SPARC, Solaris 9 SPARC
Server operating systems supportedWindows Server 2003, Windows Server 2003 x64, Windows Server 2008 R2, Windows Server 2008 x64
Package depth594 mm
Package height567 mm
Package weight31430 g
Operating altitude0 - 2896 m
Operating temperature (T-T)16 - 32 °C
Operating relative humidity (H-H)8 - 80 %
Paper input typePaper tray
Total input capacity251 sheets
Total output capacity150 sheets
Maximum input capacity901 sheets
Maximum number of input trays3
Auto document feeder (ADF) input capacity50 sheets
Included cartridge capacity (CMY)750 pages
Included cartridge capacity (black)1400 pages
Weight and Dimensions IconWeight and Dimensions
Depth558 mm
Width444 mm
Height470 mm
Weight27390 g

Related product manuals