Lexmark Dot Matrix Quick Reference

a Pull the multipurpose feeder extender.
b Pull the extender gently so that the multipurpose feeder is fully
extended and open.
2 Squeeze the tab on the left width guide, and then move the guides
for the paper you are loading.
1
2
3 Prepare the paper or specialty media for loading.
• Flex sheets of paper back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the edges
on a level surface.
• Hold transparencies by the edges. Flex the stack of
transparencies back and forth to loosen them, and then fan
them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the
transparencies. Be careful not to scratch them.
• Flex the stack of envelopes back and forth to loosen them, and
then fan them. Straighten the edges on a level surface.
4 Load the paper or specialty media.
Notes:
• Do not force paper or specialty media into the multipurpose
feeder.
• Make sure the paper or specialty media is below the
maximum paper fill indicator located on the paper guides.
Overfilling may cause paper jams.
4

Lexmark Dot Matrix Specifications

General

Brand	Lexmark
Model	Dot Matrix
Category	All in One Printer
Language	English