3 Press Enter.
Printing a menu settings and network setup page
Print a menu settings page to review the current menu settings and to verify if the printer options are installed correctly.
The network setup page prints at the same time, containing the current network settings of the printer and levels of
supplies.
From the printer control panel, press
for at least four seconds.
Notes:
• If you have not changed any menu settings, then the menu settings page lists all the factory default settings.
When you select and save other settings from the menus, they replace the factory default settings as user
default settings.
• Make sure to check the first section of the network setup page to see if the status is Connected. If the status is
Not Connected, then the LAN drop may not be active, or the network cable may be defective. Contact your
system support person for a solution, and then print another network setup page.
Using the Local Printer Settings Utility
The Local Printer Settings Utility lets you change and save settings for a printer that is connected to a computer locally
through a USB or parallel cable.
To download and install the Local Printer Settings Utility, see
“Installing the Local Printer Settings Utility” on page
9.
To access the Local Printer Settings Utility:
In Windows 8
From the Search charm, type local printer settings utility, and then navigate to:
Apps list > Local Printer Settings Utility
In Windows 7 or earlier
1 Click or Start.
2 Click All Programs or Programs > Lexmark > Local Printer Settings Utility.
To save your settings, click Actions > Apply Settings.
You can also distribute your settings to other printers by saving the settings in a command file. To save your settings
in a command file, click Actions > Save As Command File.
Installing the Local Printer Settings Utility
1 Visit http://support.lexmark.com, and then download the software.
2 Double‑click the software installer package.
9
To Next Page
Loading...
Need help?
General
Weight and Dimensions
