24
ENG
ENGLISH
WATCHING TV
Using additional options
Adjusting aspect ratio
Resize an image to view at its optimal size by pressing
Q.MENU or accessing Aspect Ratio in the PICTURE
menu.
NOTE
The available ratio varies depending on the input
source.
- 16:9: Resizes images to fit the screen width.
-
Just Scan: Displays video images in the origi-
nal size without removing parts of the edge of
the image. (This function works in Component/
HDMI (720P/1080i/1080p) Mode.)
NOTE
If you select Just Scan, you may see image
noises at the edge of the original signal.
-
Original: When your TV receives a wide
screen signal it will automatically change to the
picture format broadcasted.
Editing your programme list
When a programme number is skipped, it means that you
will be unable to select it using P
button during TV
viewing.
If you wish to select the skipped programme, directly
enter the programme number with the NUMBER buttons
or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
1 Press SETTINGS and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to Programme
Edit.
3 Edit programmes using the following buttons.
Button Description
Red button
Deletes a programme.
Press the Red button twice. The
selected programme is deleted, all the
following programmes are shifted up
one position.
Yellow button
Moves a programme.
Press the Yellow button again to
release this function.
Blue button
Selects a programme number to be
skipped. Press the Blue button again
to release the skipped programme.
4 When you return to the previous menu, press
ꕣ
BACK.
Selecting a programme on the pro-
gramme list
1 Press LIST to access the programme list.
2 Press the Navigation buttons to select to desired
programme and press OK.
3 When you return to the previous menu, press LIST.
NOTE
You may find some blue programmes. They have
been set up to be skipped by auto programming
or in the programme edit mode.
Some programmes with the programme number
shown in the programme list indicate there is no
station name assigned.
To Next Page
Loading...
Need help?
General
