30
ENG
ENGLISH
WATCHING TV / ENTERTAINMENT
Using the input list
Selecting an input source
1 Press INPUT to access the input sources.
- The connected device displays on each
input source.
2 Press the Navigation buttons or input button
to scroll to one of the input sources and
press OK .
y
Image shown may differ from your TV.
Exit
Input List
HDMI 1 HDMI 2AV 1 AV 2 Component
TV
Input source Description
TV Watch TV over the air
and cable broadcast.
AV 1/2 Watch video from a VCR
or other external devices.
Component Select it when using
the DVD or the Digital
set-top box depends on
connector.
HDMI 1/2 Watch video from a HTS
or other high definition
devices.
ENTERTAINMENT
(Depending on model)
y
Image shown may differ from your TV.
Connecting USB storage devices
Connect USB storage devices (external HDD,
USB memory) to the TV and use multimedia
features (See “Browsing les” on page 32).
Connect a USB ash memory or USB memory
card reader to the TV as shown on the following
illustration.
USB IN
To disconnect a USB storage device,
make sure to end the connection properly to
prevent damages to the TV or files.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to
Eject and press OK .
3 Disconnect the USB storage device only
when the message says that it is safe to
remove.
CAUTION
y
Do not turn the TV off or remove a USB
storage device while the USB storage
device is connected to the TV, as this
could result in loss of files or damage to
the USB storage device.
y
Back up your files saved on a USB
storage device frequently, as you may
lose or damage the files and this may
be not covered by the manufacturer’s
warranty.
To Next Page
Loading...
Need help?
General
