4
PREPARATION
ENGLISH
PLEASE SET IT UP CAREFULLY SO
THE PRODUCT DOESN’T FALL OVER.
A
You should purchase necessary components to fix the TV
to the wall on the market.
A
Position the TV close to the wall to avoid the possibility
of it falling when pushed.
A
The instructions shown below are a safer way to set up
the TV, which is to fix it to the wall, avoiding the possi-
bility of it falling forwards if pulled. This will prevent the
TV from falling forward and causing injury. This will also
prevent the TV from damage. Ensure that children do
not climb or hang from the TV.
NOTE
G
When moving the TV undo the cords first.
G
Use a platform or cabinet strong and large enough
to support the size and weight of the TV.
G
To use the TV safely make sure that the height of the
bracket on the wall and on the TV is the same.
3
1
2
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and tight-
en them securely in the upper holes.
Secure the wall brackets with the bolts on the wall.
Match the height of the bracket that is mounted on
the wall.
3
Use a sturdy rope to tie the product. It is safer to
tie the rope so it becomes horizontal between the
wall and the product.
2
1
BACK COVER FOR WIRE
ARRANGEMENT
■
Image shown may differ from your TV.
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section of the manual.
1
Open the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
as
shown and manage the cables.
2
CABLE MANAGEMENT CLIP
Fit the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
as shown.
3
NOTE
To Next Page
Loading...
Need help?
General
