To Next Page

To Previous Page

ENG

ENGLISH

EXTERNAL CONTROL DEVICE SETUP

RS-232C Setup

Connect the RS-232C (serial port) input jack to

an external control device (such as a computer or

an A/V control system) to control the product’s

functions externally.

Connect the serial port of the control device to the

RS-232C jack on the product back panel.

RS-232C IN

(CONTROL & SERVICE)

NOTE

y

RS-232C on this unit is intended to be used

with third party RS-232C control hardware

and software. The instructions below

are provided to help with programming

software or to test functionality using telenet

software. RS-232C connection cables are not

supplied with the product.

Type of connector;

D-Sub 9-Pin Male

RS-232C IN

(CONTROL & SERVICE)

No. Pin name

1 No connection

2 RXD (Receive data)

3 TXD (Transmit data)

4 DTR (DTE side ready)

5 GND

6 DSR (DCE side ready)

7 RTS (Ready to send)

8 CTS (Clear to send)

9 No Connection

Other manuals for LG 32LK330

Questions and Answers:

Need help?

Do you have a question about the LG 32LK330 and is the answer not in the manual?

General

Product color	Black
Power requirements	100 - 240 V, 50/60 Hz
Annual energy consumption	132 kWh
Response time	5.2 ms
Display diagonal	32 \
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Native refresh rate	60 Hz
Contrast ratio (dynamic)	30000:1
Display diagonal (metric)	80 cm
Screen format adjustments	4:3
Audio formats supported	MP3
Video formats supported	DivX
AV input	2
HDMI ports quantity	3
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio optical out	1
Sustainability certificates	ENERGY STAR
Power consumption (standby)	0.3 W
Power consumption (typical)	91 W
RMS rated power	20 W
Handheld remote control	No

Weight and Dimensions