6
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
EXTERNAL STEREO SETUP
Use to connected either an external amplifier, or add a subwoofer to your surround sound system.
COMPONENT IN
AUDIO
VIDEO
ANTENNA
IN
L(MONO)
R
AUDIO
VIDEOL - AUDIO OUT - R
AV IN1
AUDIO IN
(RGB/DVI)
/DVI IN
RGB IN
(PC)
RS-232C IN
(CONTROL)
1
Connect the input jack of the stereo amplifier to
the AUDIO OUT jacks on the TV.
Set up your speakers through your analog stereo
amplifier, according to the instructions provided
with the amplifier.
2
1
NOTE
► When connecting with external audio equipments,
such as amplifiers or speakers, please turn the TV
speakers off.(►65)
Wall Jack
Antenna
1
2
CONNECTING WITH A RF CABLE
■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connect the ANT OUT socket of the VCR to the
ANTENNA IN socket on the TV.
Connect the antenna cable to the ANT IN socket
of the VCR.
Press the PLAY button on the VCR and match the
appropriate programme between the TV and VCR
for viewing.
1
2
3