SuperSign Server Setup
This feature is designed for linkage with SuperSign Manager.
Player Name
You can set the name of a player you want to control in SuperSign Manager. (You can enter up to 20
characters.)
Server IP Setting
You can set the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
This feature displays the status of the connection between your monitor and the SuperSign server.
- Not connected: Your monitor is not connected to the SuperSign server.
- Waiting for Approval: Your monitor is connected to the SuperSign server but has not yet been approved.
- Rejected: Your monitor is connected to the SuperSign server but has been rejected.
- Connected: Your monitor is connected to the SuperSign server and has been approved.
SuperSign Server Setup
Player Name
Server IP Setting
Server IP Status
Press OK
Not connected
Press OK
OK
Previous
S/W : xx.xx.xx.xx Micom : x.xx.x
OK
Installation Menu (V 3.0)
Configuration Setup
Lock Mode
External Speaker
Fail Over
ISM Method
Easy Brightness Control
SuperSign Server Setup
Holiday Schedule
No Signal Image
SuperSign Server Setup
To Next Page
Need help?
General
