LG 32UD60 User Manual

14
ENG
ENGLISH
To install the monitor to a wall, attach a wall mounting
bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed
to the monitor and to the wall.
1
If you use screw longer than standard, the monitor
might be damaged internally.
2
If you use improper screw, the product might be
damaged and drop from mounted position.
In this case, LG Electronics is not responsible for it.
Installing to a wall
Install the monitor at least 100 mm / 4 inches away
from the wall and leave about 100 mm / 4 inches of
space at each side of the monitor to ensure sufficient
ventilation. Detailed installation instructions can be
obtained from your local retail store. Please refer to
the manual to install and set up a tilting wall mounting
bracket.
100 mm / 4 inches
100 mm / 4 inches
100 mm / 4 inches
100 mm / 4 inches
y
Unplug the power cord before moving or
installing the monitor to avoid electric shocks.
y
Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling
off, which could lead to injury. Please use the
genuine LG wall mounting bracket. For more
information, contact your local retail store or a
qualified installer.
y
Applying excessive force when fastening screws
may cause damage to the monitor. Damage
caused in this way will not be covered by the
product warranty.
y
Use the wall mounting bracket and screws
that conform to the VESA standard. Damage
caused by the use or misuse of inappropriate
components will not be covered by the product
warranty.
y
Screw length from outer surface of back cover
should be under 8 mm(0.31 inches).
y
Use the screws specified by the VESA standard.
y
The wall mount kit includes the installation guide
and all necessary parts.
y
The wall mounting bracket is optional. The acces-
sories can be purchased at your local retail store.
y
The length of the screw may differ for each wall
mounting bracket. Ensure the correct length
screw is used.
y
For more information, please refer to the user
manual for the wall mounting bracket.
CAUTION
NOTE
Wall mount Pad
Wall mount Pad
Back Cover
Back Cover
Standard screw
Max. 8mm (0.31 inches)
y
Wall Mount (A x B)
B
B
A
Wall Mount (A x B) 100 x 100
Standard screw M4 x L10
Number of screws 4
Wall Mount Plate
(Optional)
RW120

LG 32UD60 Specifications

General

3D	No
DDC/CI	Yes
Panel type	VA
Color depth	10 bit
Color gamut	95 %
Pixel pitch	0.181 x 0.181 mm
Aspect ratio	4:3, 16:9
Screen shape	Flat
Display diagonal	32 \
Display technology	LCD
Native aspect ratio	16:9
Contrast ratio (typical)	3000:1
Display number of colors	-
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	3840 x 2160
DisplayPort version	1.2
VGA (D-Sub) ports quantity	0
Tilt angle range	-5 - 15 °
Panel mounting interface	100 x 100 mm
RMS rated power	10 W
Number of speakers	2
Product color	Black
Market positioning	Gaming
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	50 W
Power consumption (PowerSave)	39 W
Sustainability certificates	EPEAT Gold, ENERGY STAR
Cables included	AC, DisplayPort, HDMI

Weight and Dimensions

Depth (with stand)	236.2 mm
Height (with stand)	457.2 mm
Weight (with stand)	7121 g
Depth (without stand)	50.8 mm
Width (without stand)	728.9 mm
Height (without stand)	424.1 mm
Weight (without stand)	5307 g