A-40
PREPARATION
PREPARATION
ATTACHING THE TV TO A
DESK (Only 32LE5
***
)
Desk
Stand
■ Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product. Use only
an attached screw.
WARNING
►To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw
( provided as parts of the product)
DESKTOP PEDESTAL
INSTALLATION
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
■ Image shown may differ from your TV.
SWIVEL STAND
(Only 26LE3
***,
32/37/42/47/55LE5
***
)
■ Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
CONNECTION OF TV
(Only 19/22/26LE3
***
)
■ Image shown may differ from your TV.
1
2
3
4
Connect the antenna cable to the antenna
input port on the TV.
Connect the DC adapter plug to the power
input jack on the TV.
Connect the power cord to the DC adapter
first, then plug the power cord into the wall
power outlet.
Use only power supplies listed in the user
instuction.
CAUTION
► Please be sure to connect the TV to the DC
power adapter before connecting the TV's power
plug to a wall power outlet.
DC Adapter
To Next Page
Loading...
Need help?
General
