LG 42LK530 User Manual

I
36 ENTERTAINMENT
oNOTE --------------..,
• If you want to access the Internet directly on
your TV, the broadband internet connection
should always be on.
• If you cannot access the Internet, check
the network conditions from a
PC on your
network.
• When you use
Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
• If you do not complete the network settings,
the network may not work properly.
Connecting to a wireless network
The LG Wireless LAN for Broadband/DLNA
Adaptor, which
is sold separately, allows the TV to
connect to a wireless
LAN network.
The network configuration
and connection method
may vary depending
on the equipment in use
and the network environment. Refer to the setup
instructions supplied with your access point or
wireless router for detailed connection steps
and
network settings.
Setting up the
AP (Access Point) or the wireless
router
is required before connecting the TV to the
network. The easiest method
is the WPS button
method (Third method
in this section).
(LW9500 series: Built-in the Wi-Fi Module,
Unnecessary
Wireless LAN for BroadbandIDLNA
adaptor setup)
oNOTE ----------~
• For enjoying pictures, music, or video stored
on a
PC using the router, a wired connection
is recommended.
• When the wireless port of the router
is used,
there may
be restrictions on some functions.
• It
is recommended that an Access Point (AP)
be located more than 1 m (3.28 ft) away
from the
TV. If the AP is installed closer than
1 m, the magic motion remote control may
not perform
as expected due to frequency
interference.

LG 42LK530 Specifications

General

Audio system	Dolby Digital
RMS rated power	20 W
Number of speakers	2
Game mode	Yes
Number of OSD languages	31
Response time	2.4 ms
Display diagonal	32 \
Display technology	LCD
Native aspect ratio	16:9
Native refresh rate	100 Hz
Supported video modes	1080i, 1080p
Display diagonal (metric)	107 cm
Supported graphics resolutions	1920 x 1080 (HD 1080)
RS-232 ports	1
Composite video out	0
HDMI ports quantity	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Annual energy consumption	197 kWh
Product color	Black
Power consumption (standby)	0.28 W
Power consumption (typical)	135 W
Wi-Fi	No