n
Open the battery compartment cover on the
back side and install the batteries matching
correct polarity
(
+with +,-with -
)
.
n
Install two 1.5V AA batteries. Don’t mix old or
used batteries with new ones.
n
Close cover.
n
Use a remote control up to 7 meters distance
and 30 degree (left/right) within the receiving
unit scope.
n
Dispose of used batteries in a recycle bin
to preserve environment.
Installing Batteries Remote control effective range
TV, DVD,
VCR,
PIP
GUIDE
INFO
COLOURE
Button
EXIT
LIST
MENU
I/II
SLEEP
TELETEXT
BUTTONS
Selects the remote operating mode: TV, VCR, DVD. Select other operating modes,
for the remote to operate external devices.
Switches to PIP, POP and Twin picture modes or off mode.
Shows a programme schedule.
Shows the present screen information.
They are used as per the indications or functions displayed on the TV screen in
the case of Text displays (Teletext, EPG) and programme edit.
Returns to TV viewing from any menu.
Displays the programme table.
Selects a menu.
Selects the sound output or the audio mode.
Sets the sleep timer.
These buttons are used for teletext.
Text button is used to enable teletext services while other buttons are for teletext
functions.
* For further details, see the ‘Teletext’ section
1
To Next Page
Loading...
Need help?
General
