LG 42PC51 User Manual

- 16 -
TROUBLESHOOTING
1. No power
(1) Symptom
1) Minute discharge does not occur at module.
2) Front LED does not activate.
(2) Press check
Plug in the power cord
Start Check
No
Yes
Is the power cord
plugged in?
Connect the cable.
Plasma(CN1)
No
Yes
Are the line filter and
PSU connected?
Replace the fuse.
No
Yes
Is the correct fuse for
the PSU in place?
Plasma(F101)
Connect the 13-14pin cable.
Next remove all cables connected to the PSU and
switch the AV voltage to manual.
If the ST-by 5V does not operate, replace the PSU.
No
Yes
Is the PSU and 13-
14pin cable connected
to the VSC board?

LG 42PC51 Specifications

General

Depth	83.5 mm
Height	713 mm
Equalizer	Yes
Pixel pitch	- mm
Product color	Black
Display diagonal	42 \
Depth (with stand)	310 mm
Display brightness	1500 cd/m²
Display resolution	1024 x 768 pixels
Display technology	Plasma
Power requirements	100-240V, 50/60Hz
Width (with stand)	1048 mm
Height (with stand)	766 mm
Weight (with stand)	28000 g
SCART ports quantity	1
Contrast ratio (typical)	-
Equalizer bands quantity	5
Digital vertical frequency	100 Hz
Display viewable area (HxV)	922 x 520 mm
Power consumption (standby)	1 W
Power consumption (typical)	330 W