Signage 365 Care
• You can install the Signage 365 Care (fault diagnosis) solution for fault diagnosis and prediction service.
• Install: Installs the Signage 365 Care solution.
1) ENTER ACCOUNT NUMBER: Enters the 6-digit account number to install the Signage 365 Care solution.
- Account Number: The number assigned when the Signage 365 Care solution is registered. When the account
number is entered, the account name corresponding to the number is obtained.
2) CONFIRM ACCOUNT NUMBER: Displays the account number and the account name corresponding to the account
number and validates the account number.
- If the account number is registered, the account name corresponding to the account number is displayed, and you
can continue to install the Signage 365 Care solution.
- If the account number is not registered, “Unknown” is displayed as the account name, and you cannot continue to
install the solution.
• Enable/Disable: Sets whether to Enable/Disable the Signage 365 Care solution.
• Account: Displays user’s currently connected account number and name.
• Version: Displays the version of the Signage 365 Care solution.
• Check for Update: Checks for available updates in the server.
• Update: Updates the Signage 365 Care solution to the latest version.
• Server Status: Displays the status of connection between the set and server.
- Connected: Displayed when the set and server are connected.
- Not Connected: Displayed when the set and server are disconnected.
- Waiting for Approval: Displayed when the server is waiting for approval.
- Rejected: Displayed when the server rejected the connection.
• Reset: Deletes the installed Signage 365 Care solution.
Quiet mode (Fan OFF)
• It is a function to reduce the fan noise.
• On: It lowers the brightness and turns off the fan to operate in the low noise mode.
• Off: The brightness is reverted to the original brightness, and the fan operates in accordance with the internal
temperature.
Factory Reset
• You can reset the product to factory settings.
ENGLISH
18
To Next Page
Loading...
Need help?
General
