ENGLISH_index
51
29. [Time Elapsed] (Command: d l)
Checks the elapsed time.
Transmission
(d)(l)( )(Set ID)( )(Data)(Cr)
Data FF: Read status
Acknowledgement
(l)( )(Set ID)( )(OK/NG)(Data)(x)
* The data received is shown as a hexadecimal value.
30. [Product serial number] (Command: f y)
Checks the serial number of the product.
Transmission
(f)(y)( )(Set ID)( )(Data)(Cr)
Data FF: Check product serial number
Acknowledgement
(y)( )(Set ID)( )(OK/NG)(Data)(x)
* Data is in ASCII code.
31. [Software Version] (Command: f z)
Checks the software version of the product.
Transmission
(f)(z)( )(Set ID)( )(Data)(Cr)
Data FF: Check software version
Acknowledgement
(z)( )(Set ID)( )(OK/NG)(Data)(x)
32. [White balance red gain] (Command: j m)
Adjusts the white balance red gain value.
Transmission
(j)(m)( )(Set ID)( )(Data)(Cr)
Data 00~FE: Red Gain 0 to 254
FF: Checks the red gain value
Acknowledgement
(m)( )(Set ID)( )(OK/NG)(Data)(x)
33. [White Balance Green Gain] (Command: j n)
Adjusts the white balance green gain value.
Transmission
(j)(n)( )(Set ID)( )(Data)(Cr)
Data 00~FE: Green Gain 0 to 254
FF: Checks the green gain value
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(Data)(x)
34. [White Balance Blue Gain] (Command: j o)
Adjusts the white balance blue gain value.
Transmission
(j)(o)( )(Set ID)( )(Data)(Cr)
Data 00~FE: Blue Gain 0 to 254
FF: Checks the blue gain value
Acknowledgement
(o)( )(Set ID)( )(OK/NG)(Data)(x)
35. [White Balance Red Offset] (Command: s x)
Adjusts the white balance red offset value.
Transmission
(s)(x)( )(Set ID)( )(Data)(Cr)
Data 00~7F: Red Offset 0 to 127
FF: Checks the red offset value
Acknowledgement
(x)( )(Set ID)( )(OK/NG)(Data)(x)
36. [White Balance Green Offset] (Command: s y)
Adjusts the white balance green offset value.
Transmission
(s)(y)( )(Set ID)( )(Data)(Cr)
Data 00~7F: Green Offset 0 to 127
FF: Checks the green offset value
Acknowledgement
(y)( )(Set ID)( )(OK/NG)(Data)(x)
To Next Page
Loading...
Need help?
General
