ENGLISH
76
77. [Holiday Setting] (Command: s n, 9b)
Sets holidays.
Transmission
1. (s)(n)( )([Set ID])( )(9)(b)( )
(Data1)( )(Data2)( )(Data3)( )
(Data4)( )(Data5)( )(Data6)(Cr)
2. (s)(n)( )([Set ID])( )(9)(b)( )(Data1)( )(Data2)(Cr)
3. (s)(n)( )([Set ID])( )(9)(b)( )(Data1)(Cr)
1. Setting a Holiday
Data1 Start year
00-: 2010-
Data2 Start month
01 to 0c: January to December
Data3 Start date
01 to 1F: 1st to 31st
Data4 For how long from the start year/month/date
01-07: For 1 to 7 days
Data5 Repetition
00: None
01: Every month
02: Every Year
Data6 Repeats the schedule on a date/day-of-the-week
basis.
01: On a date basis.
02. On a day-of-the-week basis.
* The minimum and maximum values for [Data1] differ
depending on the product's release year.
* You can input a value for [Data 6] only when a value has
already been set for [Data 5] (every year or every month).
2. Checking a Schedule
Data1 Select the desired schedule.
F1: Reads the 1st schedule
F2: Reads the 2nd schedule
F3: Reads the 3rd schedule
F4: Reads the 4th schedule
F5: Reads the 5th schedule
F6: Reads the 6th schedule
F7: Reads the 7th schedule
Data2
FF
3. Deleting a Schedule
E0: Deletes all schedules
E1: Deletes the 1st schedule
E2: Deletes the 2nd schedule
E3: Deletes the 3rd schedule
E4: Deletes the 4th schedule
E5: Deletes the 5th schedule
E6: Deletes the 6th schedule
E7: Deletes the 7th schedule
* This feature does not work if the current time is not set.
Acknowledgment
1. (n)( )([Set ID])( )(OK/NG)(9)(b)
(Data1)(Data2)(Data3)(Data4)(Data5)(Data6)(x)
2. (n)( )([Set ID])( )(OK/NG)(9)(b)(f)(1-7)
(Data1)(Data2)(Data3)(Data4)(Data5)(Data6)(x)
3. (n)( )([Set ID])( )(OK/NG)(9)(b)(Data1)(x)
* This feature may not be supported on some models.
78. [UPnP] Mode (Command: s n, 9c)
Sets UPnP.mode.
Transmission
(s)(n)( )([Set ID])( )(9)(c)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(9)(c)(Data)(x)
* This feature may not be supported on some models.
* Changing UPnP mode results in a reboot.
To Next Page
Loading...
Need help?
General
