To Next Page

To Previous Page

ENGLISH

Registering magic remote

How to register the magic remote

To use the Magic Remote, rst pair it with your TV.

1 Put batteries into the Magic Remote and turn the TV on.

2 Point the Magic Remote at your TV and press the Wheel (OK) on

the remote control.

* If the TV fails to register the Magic Remote, try again after turning

the TV off and back on.

How to deregister the magic remote

Press the BACK and (HOME) buttons at the same time, for ve

seconds, to unpair the Magic Remote with your TV.

* Pressing and holding the button will let you cancel and re-

Licenses

Supported licenses may dier by model. For more information about

licenses, visit www.lg.com.

(Only UH95**, UH85**, UH77**,

75UH78**, 70UH70**)

Open source software

notice information

To obtain the source code under GPL, LGPL, MPL and other open source

licenses, that is contained in this product, please visit http://opensource.

lge.com.

In addition to the source code, all referred license terms, warranty

disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM

for a charge covering the cost of performing such distribution (such

as the cost of media, shipping, and handling) upon email request to

opensource@lge.com. This oer is valid for three (3) years from the date

on which you purchased the product.

External control device

setup

To obtain the external control device setup information, please visit

www.lg.com.

Other manuals for LG 49UH603V

Questions and Answers:

Need help?

Do you have a question about the LG 49UH603V and is the answer not in the manual?

General

Display diagonal	49 \
Display brightness	- cd/m²
Native aspect ratio	16:9
Native refresh rate	100 Hz
Display diagonal (metric)	123 cm
Screen format adjustments	4:3, 16:9
Supported graphics resolutions	-
Motion interpolation technology	PMI (Picture Mastering Index) 1200
Tuner type	Digital
Number of tuners	1 tuner(s)
Digital signal format system	DVB-C, DVB-S2, DVB-T
Audio system	2.0
Audio decoders	DTS
RMS rated power	20 W
Miracast	Yes
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Video formats supported	H.265
RS-232 ports	0
RF ports quantity	2
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio optical out	1
Common interface Plus (CI+)	No
Cables included	AC
Annual energy consumption	92 kWh
Package depth	152 mm
Package width	1197 mm
Package height	760 mm
Package weight	15600 g
Operating system installed	Web OS
Product color	Black
Panel mounting interface	300 x 300 mm
Power consumption (standby)	0.3 W
Power consumption (typical)	63 W

Weight and Dimensions