ENGLISH
34
MAGIC REMOTE FUNCTIONS
/INPUT
VOL
CH
MAGIC REMOTE FUNCTIONS
When the message
Magic Remote battery is low. Change the battery.
is displayed, replace the battery. To install
batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the
compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery
to burst or leak, resulting in fire, personal injury, or ambient pollution. Be sure to point the remote control at the
remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
Do not mix old and new batteries, as this may damage the remote control.
CAUTION
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.
(POWER)
Turns the TV on or off.
Navigation buttons
(up/down/left/right)
Press the up, down, left or right button to scroll
the menu.
If you press
buttons while the
pointer is in use, the pointer will disappear from
the screen and Magic Remote will operate like
a general remote control.
To display the pointer on the screen again,
shake Magic Remote to the left and right.
(Home)
Accesses the Home menu.
(BACK)
Returns to the previous screen.
(EXIT to LIVE)
Switches among broadcast (antenna) and
various inputs.
Wheel (OK)
Press the center of the wheel button to select
a menu.
You can change channels by using the wheel
button.
VOL
Adjusts the volume level.
/INPUT
Displays the Screen Remote.
* Accesses the Universal Control Menu in some
regions.
* Pressing and holding the
button will
display a menu to select an external device that
is connected to the TV.
Used for viewing 3D video.
(MUTE)
Mutes all sounds.
CH
Scrolls through the saved channels.
(Voice recognition)
Network connection is required to use the
voice recognition function.
1. Press the voice recognition button.
2. Speak when the voice display window
appears on the left of the TV screen.
* Use the Magic Remote no further than 10
cm from your face.
* The voice recognition may fail when you
speak too fast or too slowly.
* The recognition rate may vary depending
upon the user’s characteristics (voice,
pronunciation, intonation, and speed) and
the environment (noise and TV volume).
Color buttons
These access special functions in some menus.
( : Red, : Green, : Yellow, : Blue)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
