ENGLISH
35
MAGIC REMOTE FUNCTIONS
Registering Magic Remote
The Magic Remote operates by pairing with your TV.
How to register the Magic Remote
(Wheel)
To use the Magic Remote, first pair it with
your TV.
1 Put batteries into the Magic Remote and
turn the TV on.
2 Point the Magic Remote at your TV and
press the
Wheel (OK)
on the remote
control.
* If the TV fails to register the Magic
Remote, try again after turning the TV off
and back on.
How to deregister the Magic Remote
(BACK)
(Home)
Press the
(BACK)
and
(Home)
at the
same time, for five seconds, to unpair the
Magic Remote with your TV.
»
Pressing and holding the
(EXIT to LIVE)
button will let you cancel and re-register
Magic Remote at once.
How to Use Magic Remote
Shake the Magic Remote slightly to the right and
left or press
(Home)
,
/INPUT
, buttons to make
the pointer appear on the screen.
(In some TV models, the pointer will appear when
you turn the Wheel button.)
If the pointer has not been used for a certain
period of time or Magic Remote is placed on a flat
surface, then the pointer will disappear.
If the pointer does not move as you wish, shake
Magic Remote to the left and right. The pointer
will move to the center of the screen.
The Magic Remote depletes batteries faster than
a normal remote due to the additional features.
Precautions to Take When Using the
Magic Remote
Use the Magic Remote within the maximum communication
distance (10 m). Using the remote control beyond this
distance, or with an object obstructing it, may cause a
communication failure.
A communication failure may occur due to nearby devices.
Electrical devices such as a microwave oven or wireless
LAN product may cause interference, as these use the same
bandwidth (2.4 GHz) as the Magic Remote.
The Magic Remote may be damaged or may malfunction if it
is dropped or receives a heavy impact.
Take care not to bump into nearby furniture or other people
when using the Magic Remote.
Manufacturer and installer cannot provide service related to
human safety as the applicable wireless device has possibility
of electric wave interference.
It is recommended that an Access Point (AP) be located more
than 1 m away from the TV. If the AP is installed closer than
1 m, the Magic Remote may not perform as expected due to
frequency interference.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
