17Installation
Installation
3
Resolution Setting
The player provides several output resolutions
for HDMI OUT and COMPONENT VIDEO OUT
jacks. You can change the resolution using
[Setup] menu.
1. Press HOME (
).
2. Use
Y
to select the [Setup] and press
ENTER (
). The [Setup] menu appears.
3. Use
vV
to select [DISPLAY] option then
press
B
to move to the second level.
4. Use
vV
to select the [Resolution] option
then press ENTER ( ) to move to the third
level.
5. Use
vV
to select the desired resolution
then press ENTER ( ) to conrm your
selection.
NOTE
• If your TV does not accept the resolution you
have set on the player, you can set resolution to
480p as follows:
1. Press
Z
to open the disc tray.
2 Press
x
(STOP) for more than 5 seconds.
• Since several factors aect the resolution of
video output, see “Video Output Resolution” on
page 58.
• When you set the HDMI Resolution, over 720p is
not outputted to Composit Video.
BD551-N.BUSALLP_0487.indd 17 7/19/11 11:41 AM
To Next Page
Loading...
Need help?
General
